APOLLO ROBOTICS

MLU-808CS

Home > Products > Soldering-only > MLU-808CS

Functional Motion Images

9-1

9-2

9-3

9-4

9-5

Features
Qualification

- Six Features of Microlaser Soldering System

Optical technology enables small beam spot shapes, sharp laser irradiation angles, and long focal lengths at the same time, and is suitable for high-density mounting tasks such as fine and narrow pitch parts.
In addition, the temperature control function controls the laser heating temperature. It is equipped with models from wavelength-dynamic infrared to ultraviolet, and can be processed for various purposes such as soldering and UV curing.

- Temperature control unit

Temperature measurements can be carried out in a non-contact manner on the solder part to feed back the temperature to the output of the laser to keep the joint temperature constant. The conditions of the solder part irradiating the laser are individually met
In other cases, soldering, which was difficult to solve with laser soldering, is possible.

			MLU-808CS	MLU-808FS
TYPE			Semiconductor Laser	Semiconductor Laser
Oscillation			CW	CW
LD Type			Collimation	Optical Coupling
Light source Output			35W	30W 45W(OP 60W)
Wave length			808nm(OP 940nm 980nm)	808nm(OP 940nm 980nm)
Halation prevention			○	○
LD cooling system			Electronic cooling	Electronic cooling
Coaxial Observation function			○	○
Optical Cable			--	Φ200μm Φ400μm(OP 100μm)
Optical Cable Length			--	1.5m/3m (OP 1m~8m Free choice)
Concentrating Beam			Φ50μm ~ 500μm Select within range ------------------------------------- Φ500μm ~ 1000μm Select within range	Φ100μm ~ 4000μm Select within range
Focal Length			100mm	10mm ~100mm
Beam Shape			Free Shape Circular or Spherical	Circular
Parameters control mode	Time	Setting Resolution	100ms	100ms
		Number of steps	1~100 STEP	1~100 STEP
		Setting the Time	--	--
	Current control	Setting Resolution	0.1A	0.1A
	Current control	Range of settings	0.2A ~38.0A	0.2A ~ 38.0A
	Output control	Resolution of registration settings	0.01W	0.01W
	Output control	Range of settings	0.01W ~About 30.00W (The output of the upper limit varies depending on the specifications of each optical system.)	For light source type 30W, 0.01W~ (The output of the upper limit varies depending on the specifications of each optical system.)
Current Repeated Degree			±100mA	±140mA
Current Set Degree			±50mA	±70mA

-Examples of various application junctions

Chip Capacitor (0603)	Patterns and patterns (100 μm width of pattern)	Terminals and Patterns	Through Holes and Patterns

All Product