APOLLO ROBOTICS

TECHNOLOGY EDUCATION

Home > Support > Technology Education

Information on regular technical training

We provide regular robot soldering technology training. (The cost and accommodation of the training are supported by our company.)


lead-free soldering technology	Education and Practice Room	Facility practice	Robot Lead Slab Practice

Reqular traning schedule

Occasional training will be conducted separately at the request of customers and our company and will be held from 1st to 5th (Detailed schedule will be contacted separately to the relevant customer company)

1st

Feb.(3rd)

2st

May(3rd)

3st

July(3rd)

4st

Nov. (3rd)

Information on technical training from time to time

It is conducted and operated at the request of the company and customers. It is operated frequently due to reasons such as new models and movement of facility managers before receiving facilities and relocating overseas facilities.

Regular basic training schedule

Trainer : Practice - tb kim, Theory - ys.cho

Day 1

Day 3

09:00
~10:00

10:10

~11:00

11:10
~12:00

12:10
~13:00

1. Introduction of training schedule and instructors

2. Lead-free soldering theory (basic, principle)
1) Soldering alloy components and Flux technology
2) Indu Tip Specifications
3) Soldering temperature and lead-free selection

3. Understanding the structure of robots & automatic soldering devices
1) Composition of Robot Soldering Facility
2) Robot Soldering Structure and Principles
3) Understanding DCS High Power Method (PWM Method)

1. Operation of soldering robots

1) Learn Teaching and Parameters
2) Robot Application Practice
3) Robot default setting (initial setting)
4) System Setting and Temperature Calibration

2. Analysis and response of soldering defects
1) 4M Analysis
2) Response Techniques by Defect Type
3) Precision Soldering and GND Soldering Response
4) Lead, Flux, Tip Specifications and Soldering Conditions
Understanding quality change according to

1. Demonstrate high-speed soldering techniques, practice

1) CY Simultaneous Operation Technique
2) Basic Conditions for High Speed Soldering
3) Management and care in high-speed soldering operation
Point

2. Robot Main Turnence
1) a robot
2) Solder Controller and Feeder
3) Iron unit
4) Action in case of abnormality during work

13:00
~14:00

Lunch

14:00

~15:00

15:10
~16:00

16:10
~17:00

17:10
~18:00

4. Understanding Robot Soldering Techniques
1) point, slide soldering
2) Slide/Point Simultaneous Techniques
3) Simultaneous operation technique
4) Part and tooth separation response techniques

5. Response by cause of defective lead balls
1) Verifying and responding to the cause of lead ball occurrence

6. Understanding soldering parameters

3. Robot soldering practice for each company's products
1) Problem Analysis and Response
2) Productivity Improvement Response

4. Robot Soldering Work Standard Tips
1) Work Standards Preparation Practice
2) Preparation and management of facility management standards
3) How to use PC Soft

3. Analysis and response of each company's quality problems
1) Validation and demonstration

4. Evaluation and discussion of education

5.16:00 End of training